PET preform mould Specification
Mould name 96 cavity preform mould for PCO 1810 Neck 12.6g Preform
Mould cavity 96 cavity
Neck finish PCO 1810 Neck finish
Preform weight 12.6g
Insert materials ASSAB FS136/Purpose made 632
Mould plate 4Cr13/P20（Preharden）
Hot plate H13（Preharden）
Heating coil Rotfil from Italy/Hotset from Germany
Copper nozzle Beryllium bronze From Italy
Insulator From USA DU PONT
Suitable injection molding machines Husky, Netstal PET line, PET Master, General PET injection molding machine
Location: Chinese mold
Business Type: Manufacturer, Exporter
Certificate: ISO9001;CE;WRAS;GSG;National Torch Program Certificate
Terms of payment and delivery: 30% down payment;70% before shipment/FOB CIF
Minimum order quantity: 1 set
Packing details: Wooden pallet
Delivery time: 1-4 months
Payment method: T/T L/C
1.We are one of the most reliable companies in this domain offering PET Preform Mould with advanced mould design technology.
Multicavity: 1-8 cavity, 12 cavity, 16 cavity, 24 cavity, 32 cavity, 48 cavity, 56 cavity, 72 cavity and 96 cavity.
Neck finish:PCO, 1810,1881,30/25,29/25,38 ,ALASK, ROPP; Jar neck and others.
-Customized material 632:Better than FS136, with higher nickel and chromium contents.
-Toughness, rust resistance, brightness effects are increased significantly.
-Mould base is made of stainless steel or P20（Preharden）with HRC 38~40.
SelfLock type stack design
-Thread splits are locked in position by lock rings before mould closing to minimize wear of thread split tapers on the cavity side and core side for a long flash-less service life of parting-lines.
Fountain or spiral cooling structure is used in the core.
Spiral waterway is used to milled outside the cavity,improve cycle efficiency and reduce cleaning times.
Neck drilled cross cooling channel.
Each plate is individually designed with a circulation cooling channel.
Optimized cooling layout is used to ensures fast and efficient heat exchange between steel and water and support fast cycle times to save energy costs.