best shoes for standing on concrete floors all day

Here's a new page, just for you! laugh

Let's see in detail the main types of shoes and their indications.

Running shoe
Among the types of shoe, this is used to support loads of continuous elements that have loads distributed in a linear manner.

For example: walls, walls and others with an elongated effect. As this is a shallow foundation, its excavation is usually done by hand, without the use of special machines or equipment.

In general, the running shoe is made with cyclopean concrete (concrete and hand stones). As the loads are linear, this shoe is thin in relation to its length and therefore not very rigid.

This characteristic causes deformations to appear along its extension, which can generate cracks or cracks in the behaved walls.

So, consider increasing the best shoes for standing on concrete floors all day stiffness to avoid post-construction complications.

This type of shoe is more used in small constructions, such as low-rise houses and buildings, sheds, boundary and retaining walls, walls of reservoirs and pools, etc.

Associated shoe
This type of shoe can be known as a combined shoe or partial radier. It is the most used when it is desired to transmit the actions of two or more pillars. It is also used as an alternative when the distance between two or more insulated shoes is small.

In this case, the shoe bases could overlap or influence the other structurally. Thus, the use of a single associated shoe is more appropriate, because it can receive the load of two or more abutments nearby.

To obtain the balance between the measures of the stiffness beam and the slab balances, the shoe must be centered on the column's center of gravity.