Steps for Canon Pixma pro-100 setup

 

When shopping for a new Canon Pixma Pro 100 printer, get all the necessary printer components inside the box and check whether any of the material is missing from the box or not. Replace with a new one if any parts are missing.

Here you will get the most efficient method for setting up a Canon Pixma Pro 100 printer by both the wired cable connection method and the WPS (wireless) connection method.

 

This Canon PIXMA pro100 printer is a portable, reliable, and easy to use the printer. It can print photos or borderless pages in 50 seconds, its maximum resolution is 9600 x 2400 dpi in color, Canon Pixma Pro-100 driver download.

The Canon PIXMA pro100 printer has many useful features like IrDA compatibility, Bluetooth interface, etc. With the help of these features, you can print any document very easily and with very good quality. Canon Pixma pro-100 setup is easy. This Canon PIXMA pro100 printer driver is available for Windows XP, Windows Vista, Windows 7, and Windows 8. Canon Pixma Pro-100 driver download.

 

How to set up a Canon Pixma pro-100 wired connection?

 

Through these steps mentioned below, you can configure your Canon Pixma Pro 100 printer via a standard USB connection method.

 

  • Make sure to turn on your Canon Pixma Pro 100. The power-on lamp will light up after doing so.

  • First of all, you need to remove the top port cover that is located on the right side at the back of the Canon Pixma Pro 100 printer.

  • Using an Ethernet cable, connect your printer and network device, and be careful not to connect to the USB port.

  • In the final step, you must press the cancel or resume button present on the printer until the power lamp blinks a total of eleven times.

  • Now release the cancel or resume button after the eleventh flash.

  • Find your model number after visiting the Canon website, select your operating system, and hit the download option to download the printer driver.

  • Click on the driver package option to open the settings once the download process is complete and following the on-screen instructions complete the installation process.

  • To open the control panel, click the start button in windows.

  • Select the device and printer option from the window that follows

  • The user will be able to see a list of the installed printer after clicking the Add Printer option present in the left corner.

 

Canon Pixma pro-100 setup process

 

The steps mentioned below are a process to set up a Canon Pixma pro-100 wireless connection via the WPS connection method.

 

Simultaneously press the button on the access point and hold down the Wi-Fi button on the Canon Pixma Pro 100 printer.

Make sure the power-on lamp lights up immediately along with the Wi-Fi lamp flashing rapidly.

Within 2 minutes press and hold the access point button

Make sure the power lamp and the Wi-Fi lamp are lit.

Your wireless setup connection is made for your Canon Pixma Pro 100 printer.

 

Canon Pixma 100 Pro wireless connection setup in Windows

 

After connecting the Canon Pixma Pro 100 to Wi-Fi exactly according to the step mentioned above, follow the steps below:

 

By visiting "canon.com/ijsetup", download the printer driver on your Windows computer.

Select your printer model from the list given and hit the download option. Click on the driver package option to open the settings once the download process is complete and therefore after completing the installation steps, carefully follow the on-screen instructions.

Now to open the control panel, click the windows start button or open the run dialog box and type the control panel and then press OK.

Click on the Add Printer option from where the user can check the list of installed Canon printers and then choose their printer from the list and wait a few seconds.

The printer will be ready to use once its name is placed in the devices and printers section.

 

Canon 100 Driver Installation

 

Use the Starter CD to install the driver.

Load the CD into the system disc drive.

Follow the instructions mentioned on the screen to continue.

Choose the Language option to select the language.

If the file does not display correctly, double-click the My Computer icon.

Click on the CD-ROM icon and select the installation file to install the driver.

For a Mac system, click on the CD-ROM on your desktop.

Incorrect driver installation can be done by downloading it. Install the driver with the help of the on-screen prompts after downloading. Choose the type of connection and finish the process by clicking on the Finish option.

 

Conclusion

 

The information provided on Canon-photo-printer.com is designed as a complete solution for the canon Pixma pro-100 wireless setup. If you facing an issue during canon printer setup you can contact us.