Limited Time Offer: Get 2 Months of ABCmouse.com for only $5!

<div><br></div><div>PRODUCT</div>

NATURE GRAPHITE ELECTRODE
Graphite electrodes are used mainly in ladle furnaces,electric-arc furnace steelmaking,Yellow phosphorus furnace , Industrial silicon furnace or melting copper. They are presently the only products available that have the high levels of electrical conductivity and the capability of sustaining the extremely high levels of heat generated in this demanding environment.High Quality Needle Coke in HP&UHP graphite electrode,ensure the electrode application is perfect. Graphite electrodes are also used to refine steel in ladle furnaces and in other smelting processes.

1.To Place the nipples, first HP graphite electrode for smelting steel compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread). 
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two extremes. 
3.Connector locations should be selected c-map. 
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque. 
5.To avoid electrode broken, please remove the insulating material in the furnace. 
6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper.

Get 2 Months for $5!