Is the MOT test for your automobile coming up soon? Improve the odds that your vehicle will pass the inspection on the first try. Learn how to get the most out of your vehicle by reading this simple advice before going for your MOT London.
If your vehicle is older than three years, you need to have it undergo a yearly MOT inspection to guarantee that it is roadworthy.
An MOT could seem to be nothing more than an additional fee. On the other hand, it may assist uncover hidden issues. If you leave these issues unchecked, they might compromise the overall integrity of your vehicle's safety. In addition, operating your vehicle without a current and valid MOT makes it unlawful to do so. Unless, of course, you have a test appointment scheduled in advance. In most cases, doing so will render your insurance null and void.
Approximately forty per cent of the vehicles that come for MOT certification fail the test.
Do you want to check to be sure that your automobile is not one of those that fail? Continue reading to learn how to increase the likelihood that your vehicle will pass the inspection on the first try. We will walk you through the short tests that you may do to ensure that a tiny error will not catch you off guard.
The MOT inspector will classify any flaws that they uncover as either "hazardous," "serious," or "minor," depending on the severity of the issue. Your vehicle will not pass its MOT if it has a defect that is "dangerous" or "significant." If your vehicle has a serious flaw, you must correct it before you may continue driving it.
Since 2018, there have also been more stringent regulations on exhaust for diesel vehicles that come with DPFs. DPFs function to lower diesel vehicle emissions vehicles by collecting and storing soot from the exhaust. If the MOT inspector notices smoke rising through the exhaust or finds signs of meddling with the DPF, your vehicle will get a significant penalty and flunk its test.
Before your MOT inspection, the outside of your vehicle
Tyres and wheels
Tyres for cars need to be of the appropriate size and kind. Before the test, switch out any wheels that have a space-saver spare tyre mounted on them for ordinary wheels that have standard tyres mounted on them.
Make sure that the tread thickness of each tyre is at least 1.6 millimetres in the middle three-quarters of the design and all the whole across the perimeter of the tyre. To verify this quickly, just place a twenty-pound coin within one of the slots in the tread. When the circumference of the coin can no longer be visible, this indicates that the tread thickness is adequate.
Additionally, check the sidewall for any substantial bumps or cuts that might make it inappropriate for its intended use. In addition, the air pressure in the tyres should not be noticeably low.
The MOT does not include an inspection of the spare tyres on the vehicle. However, those that are in the open air will need additional security measures.
Lights
Each of your lights must have the appropriate hue. For your vehicle to clear the MOT inspection, they need to be in proper operating condition. Additionally, daytime navigation headlights will be under inspection on each vehicle.
After you have cleaned your lights, have someone else test them for you as you walk across the vehicle. It's time to tighten them down or replace them if they flash when you touch them with your hand. If you notice that one of your bulbs gets burned out, it is in your best interest to replace it before you take the MOT test.
Windshields And Windscreen Washers
If the windscreen wipers and washers are functioning properly, you should have an unobstructed view of the road ahead. The wipers may have worn out if they leave streaks. Therefore, be sure you change them before the inspection. If you have headlamp washers, you should make sure they are working properly.
Be careful to fill the bottle with more washing solution. There may be a fee along with this at certain facilities. If it is necessary, insert a pin to unclog the jets.
Before you take the MOT examination, it is essential to check that the windscreen in your vehicle is in working order. More specifically, the region the wipers clean. Take off any labels that can get in the way of your vision. Watch out for chipping or cracks that are longer than one centimetre.
Registration plates
Check that the licence plates on your vehicle are in excellent shape. It should not be difficult to read any of the letters or numerals from a distance of twenty metres. Be aware that the authorities may interpret the usage of non-standard fonts as an effort to evade justice.
Are you unclear as to whether or not your licence plate satisfies the standards set out by the law? Before coming in for your MOT inspection, make sure you check the webpage for the DVLA. We also provide Body Repair London for your vehicle.